FoxEdges MMMeedium Tackle Box
Always well sorted!The new Fox Tackle Box series is based on the legendary Fox F-Box concept, reacts to approaches on the current market and implements a whole range of its own ideas, only to end up there again where it belongs - at the forefront of tackle box design. By using the entire lid as additional storage space for small items, we have increased the capacity while still keeping the box as compact as possible. The lid section offers 37 individual compartments, is fitted with improved hinges and tinted locking lids allowing contents to be seen. In addition, a full sheet of stickers is provided to clearly mark the contents so you can identify them very quickly.When you open the box, the lid stops at exactly 180 degrees, so binding the Rigging with the tackle box on your lap becomes easier as the lid now forms a flat work surface. In addition, there is a ruler on both the inside and outside of the lid to make tying the rigs more precise. The tackle box base has been designed to fit all new standard and XL compartment boxes, the adjustable compartment boxes, the Hook boxes and the ingenious leader racks in standard and XL sizes. The box is equipped with 3 long, 2 short and one medium-length dividing element, which can be removed and thus divide the base part individually as desired. The division of the partitions is so well thought out that a maximum of space is used and none of the insert boxes can wobble around due to wasted space and all small parts are optimally and efficiently protected. All small parts from rig tools to standard hooklength spools to larger leader spools fit perfectly in this box.The tackle box also uses a VCI (Volatile Corrosion Inhibitor) protection in the material, which reduces corrosion if objects get in should get wet in the box.Product details:
Size: 27cm x 19cm x 7cm
2 x large dividers
2 x small dividers
1 x Splitter Divider
1 x Horizontal
Sticker packSupplied without content!< /p>
FoxEdges Loaded Medium Tackle Box
The complete tackle box set - 7 pieces! The new Fox tackle box series is based on the legendary Fox F-Box concept, reacts to approaches on the current market and implements a whole range of its own ideas, and so on ending up back where it belongs - at the forefront of tackle box design. By using the entire lid as additional storage space for small items, we've increased capacity and yet kept the box as compact as possible. The lid section offers 37 individual compartments, is fitted with improved hinges and tinted locking lids allowing contents to be seen. In addition, a full sheet of stickers is provided to clearly mark the contents so you can identify them very quickly.When you open the box, the lid stops at exactly 180 degrees, so binding the Rigging with the tackle box on your lap becomes easier as the lid now forms a flat work surface. There is also a ruler on both the inside and outside of the lid to make tying the rigs more precise. The tackle box base has been designed to fit all new standard and XL compartment boxes, the Adjustable Compartment boxes, hook boxes and the ingenious leader racks in standard and XL sizes. The box is equipped with 3 long, 2 short and one medium-length dividing element, which can be removed and thus divide the base part individually as desired. The division of the dividing walls is so well thought out that a maximum of space is used and none of the insert boxes can wobble around through wasted space and all small parts are optimally and efficiently protected. All small parts from rig tools to standard hooklength spools to larger leader spools fit perfectly in this box.The tackle box also uses a VCI (Volatile Corrosion Inhibitor) protection in the material, which reduces corrosion if objects get in should the box get wet.Included 2 x Large Divider, 2 x Small Divider, 1 x Splitter Divider and 1 x HorizontalProduct details:
Size: 27cm x 19cm x 7cm
1 x 4 Compartment Internal Box
1 x 6 Compartment Internal Box
1 x Leader Rack
3 x hook boxes
plus sticker packDelivery without tackle content
Fox Edges Carp Braid Blades XS Scissors div> Snap, snap! < / div> This fantastic new addition to our small parts range cuts effortlessly through all materials such as braid and nylon , Fluocarbon, Leadcore and coated leaders. These razor-sharp scissors also fit perfectly into your F Box. Product details of the Fox Edges Carp Braid Blades XS: Easily cuts braid, nylon, fluorocarbon, leadcor and coated leaders
FoxEdges Leader Rack Standard 10.5x8x2.5 cm
Untangling is a thing of the past!The leader rack makes it possible to stow a wide variety of pre-tied leaders by using the metal pins and hanging points. These racks hold up to 10 pre-tied leaders including the weight system such as lead clips or helicopter beads and sleeves.Product details:
Size: Standard
Dimensions 10.5x8x2.5 cm
Accommodates up to 10 leaders.Supplied without tackle content
FoxEdges Spinner Rig 05 3 Pieces
The most popular carp rig for maximum versatility!The Fox Edges Spinner Rig is the preferred rig among carp anglers worldwide. Whether pop-ups, wafters, or bottom baits – this rig offers you the highest flexibility and an outstanding hook hold thanks to the Edges Wide Gape Long Shank hook.The size 11 spinner swivel ensures optimal mobility, while the Naturals shrink tube and the mini ring swivel allow for secure bait attachment.Simply attach your bait with Bait Floss to the Mini Hook Ring Swivel and insert the Powergrip Hook Bead to fix the hook in place. Ideal for use on almost any type of bottom!Product details:
The world's most popular carp rig
Can be used with popups, wafters, and bottom baits
Just attach your preferred leader material
With size 11 spinner swivel for optimal mobility
With Edges Wide Gape Long Shank hook for incredibly good hook hold
Naturals shrink tube
With mini ring swivel for bait hook attachment
Attach your bait to the Mini Hook Ring Swivel with Bait Floss
With Naturals Powergrip Hook Bead
Perfectly usable on almost any type of bottom
Available in sizes 4, 5, 6, and 7
3 rigs per pack made of recyclable cardboard
Fox Edges Tapered Mainline Sinkers Not only help with the lowering of the main line, but are also designed in a conical shape and therefore slide easily over leaders, which results in a secure installation. In conjunction with the Fox Tungsten Beads in 5mm, the Tapered Mainline Sinkers are ideal for & quot; Naked Chods & quot;. div> Product details of the Fox Edges Tapered Mainline Sinker: < / Contents: 9 pieces per pack l i>
Fox Edges PVA Mesh Refills 20m Fast Melt Don't let up, refill! < font face = Arial size = 5 color = green> The Fox Edges PVA Mesh Refills are extremely high quality and also non-fraying PVA nets for refilling strong > of your Edges PVA Mesh system. This (Fast Melt) version is suitable for winter or shallow water. Product details: length : 20m Diameter: 25mm - Narrow div>
Fox
Edges Camo Run Ring Kit
The perfect trap!
The Edges Camo Run Ring Kit is specifically designed to create a perfect barrel lead assembly. To reduce tangles during casting, the lead hangs vertically downwards as you cast the line.
The included T-pins allow you to hold your lead firmly in place and the camo coloring significantly minimizes the visibility of this kit to your prey.
Product details:
Color: camo
Contents: 8 kits
made for barrel mounts
reduces tangles
Fox
Edges Camo Naked Chod / Heli Buffer Sleeves
Protect your main line!
The Edges Camo Naked Chod / Heli Buffer Sleeves are designed to protect your monofilament main line when fishing directly with chod or helicopter rigs. They are also ideal if you are fishing with a monofilament main line and fluorocarbon leader. The tapered sleeve can also be shortened to adapt to different leader materials. Thanks to the small hole on the side of the rubber, you can also use it when mounting with a movable lead.
In addition, the camo coloring significantly minimizes the visibility of this rubber for your prey.
Product details:
Color: camo
Contents: 5 pieces
protects monofilament main lines
ideal for monofilament main lines & main lines with fluorocarbon leaders
side hole
Fox
Edges Tri Pear Inline Lead
Increases Hakrate!
The Tri Pear Inline Lead from Fox is a newly designed tri-pear inline lead. The compact shape ensures that the fish quickly feels the full weight of the lead, improving the self-hooking effect and increasing the hook rate. In addition, the 3D camouflage structure surface coating is very robust, non-reflective and matt rubberized. Swivels extend into the inline insert, so that rings and quick change swivel eyes can be positioned “semi-hidden” but free of movement for use as a drop-off assembly. There is a groove on one side of the lead for a recessed leader run when the lead is inserted semi-fixed in a “drop-off” style. The inline lead is compatible with all Fox 'Edges' in-line products. The standard rubber inserts pull out of the lead so that when installed correctly, leaders, hoses and knots can slide through the lead for the safety of the fish.
Product details:
Weight: 42g / 1.5oz
newly designed tri-pear inline lead
low center of gravity
Drop-off assembly
Groove on one lead side
Compatible with all Fox 'Edges' in-line products
Attention: Sales only take place in units of 5
The stated selling price is always the price per piece!
The packaging unit is always 5 pieces=total price sales price x 5="times>
Fox Edges Curve Short Fluo D-Rig
The perfect rig for Wafter & Co.!
The perfect rig to offer wafter hook baits. Is most effective when presented on a clean surface. Tie the hookbait to the Micro Hook Ring Swivel with Bait Floss. Product details:
Contents: 2 pieces
Hook size: 4
Load capacity: 20 lbs
Trans Khaki Illusion Fluorocarbon
Size 7 Kwik Change Swivel
Camo Micro Anti Tangle Sleeve
Edges Arma Point Curve Short Hook
Kuro Micro Hook Ring Swivel
Fox Edges XL Adjustable Box 11.5x9.5x2 cm
You can adjust the subdivisions!A separate insert box with 4 adjustable long and 3 short dividers, so that you can divide them individually from two large compartments to 9 subcompartments of the same size - perfect for a wide variety of small parts.< br />Product details:
Dimensions 11.5x9.5x2 cm
4 long dividers
3 short dividersSupplied without content
FoxEdges Essentials Rig Rings
Indispensable for every carp angler!The Fox Edges Essentials Rig Rings are a practical addition for anglers looking for versatile rig options. These rig rings are characterized by their round profile and have a non-reflective coating. This makes them ideal for situations where minimal visibility is required.The use of Rig Rings allows the bait to move freely on the hook shank or on D-rigs, making the presentation more natural and improving the fishing prospects.These small but important components are supplied in recyclable cardboard packaging, making them not only practical but also environmentally friendly.Product details:
Size Large
Content 25 pieces
FOXEdges AP Stiff Rig Chod Rig Short 30lb 6
With Micro BarbTied from Edges Rigidity Trans Khaki Stiff Monofilament with Edges Stiff Rig Beaked Hooks. Equipped with Edges Micro Hook Swivels on the D, to allow the attachment of bait & Flexi Ring Swivels in size 11. Product details:
Color: Trans Khaki
Contents: 3 Rigs per pack
with Micro Barb
Breaking strength for hook sizes 6, 7 & 8: 25 lb (11.3 kg)
Breaking strength for hook sizes 4 & 5: 30 lb (13.6 kg)
delivered on foam discs that fit precisely into a Multi Chod & Zig Bin
Lengths: Short (Short)
FOX Edges Easy Splice Needle Stainless steel wire div > The ideal needle for splicing, with a diamond profile! < / The Edges Easy Splice Needle is the ideal tool for splicing from leadcore and lead-free leaders, as well as for the new Edges Camo-Splice leader materials. The diamond profile ensures uncomplicated and effortless use. Product details: Color of the handle: green
FOXEdges Hair Braid
Extremely soft and fine hair braid!
The Edges Hair Braid helps you when tying hair montages or fixing it to the hook shank.Product details:
Length: 10m
Color: Brown
Fox Edges Camo Leadcore Woven leader, 50lb, 25m font > Heavy-duty leader line! < / The Edges Camo Leadcore leader lines are woven and equipped with a soft inner core , which is called Abrasion-resistant sinking leader can be spliced. The innovative color-breaking camouflage color fits perfectly h perfectly on various surfaces in lakes and rivers. Product details: Color: camouflage color Load capacity: 50lb font > Length: 25m
Fox
Edges Camo Grip Lead Clip Kit
The kit for your perfect lead clip setup!
The Edges Camo Grip Lead Clip Kit was specifically designed to build a lead clip setup. Accordingly, your lead will only be lost if the fish on your rod gets stuck in an obstacle.
A kit includes Power Grip Tail Rubber, Lead Clips (size 7) with T-pins, Standard Anti Tagle Sleeves and Kwik Change swivels (size 7).
In addition, the camo coloring significantly minimizes the visibility of this kit for your prey.
Product details:
Color: camo
Size: 7
Contents: 5 kits
ideal for lead clip setups
Fox Edges Fast Melt PVA Wide Refill
Don't let up, refill!
The Fox Edges Fast Melt PVA Wide Refills are extremely high quality and non-fraying PVA meshes designed to refill your Edges PVA Mesh system (not included). You can use the Fast Melt Refill in winter, or when you are fishing in a place where the water is shallow. Product details:
Refill pack
Length: 20 m
Ø 35mm
suitable in winter and in shallow water
Delivery only PVA refills!
Fox Edges Kling On
Ideal for boat fishing!
Kling On lead in a new design, ideal for boat fishing, bottom fishing over long distances and in fast-flowing rivers Shaped 3D camouflage texture. Robust, camouflaged, non-reflective, matte rubber coating. Large eyelet swivel that fits easily onto any lead clip and fits perfectly into all Fox Heli Buffer Sleeves Minimized loop height on all swivel leads to reduce swivel “free play” when mounted to a lead setup
Product details:
Weight: 170g / 6.0oz
Suitable for boat fishing or fishing in fast-flowing rivers
large swivel eye for easy assembly
minimized eyelet height
Attention: Sales only take place in units of 5
The stated selling price is always the price per piece!
The packaging unit is always 5 pieces Total price retail price x 5
Fox
Edges Flat Pear Inline Lead
An inline lead for many areas of use.
The Fox Edges Flat Pear Inline Lead is a newly designed, flat pear lead, ideal for most applications and particularly for use in compact PVA bags. It has a 3D camouflage structure and a low center of gravity, so the weight acts quickly on the hook once the fish has picked up the rig.
The Fox Edges Inline Leads are compatible with Fox's inline accessories such as Tadpole Beads or Drop-Off Kits.
Product details:
Weight: 113g / 4.0oz
Attention: Sales only take place in units of 5
The stated selling price is always the price per piece!
The packaging unit is always 5 pieces Total price retail price x 5
Fox Edges Curve Short Rig
A classic and very proven rig!
A classic, super effective and very proven rig. Perfect for bottom baits and popups. Free extension boilie stopper included, suitable for most bait sizes. Simply add some Power Grip Putty or a Kwik Change Pop Up Weight to transform the rig into a pop-up rig. Product details:
Contents 2 pieces
Hook size 2
Load capacity 35 lbs
Camotex Semi Stiff Coated Braid
Size 7 Kwik Change Swivel
Camo anti tangle sleeve
Edges Arma Point Wide Gape Beaked Hook
Camo Short Line Aligna
Fox Edges Link Illusion Fluorocarbon
The perfect leader for the rig!
Edges Link Leaders are designed to work specifically with Edges Crimps to create perfect, clean and neat crimped rigs. Ideal for creating stiff connections on rigs such as The Hinge Rig, Ronnie/Spinner Rig and various Combi Rigs. The two different diameters/breaking strains are sized to fit the corresponding sizes of Edges crimps, i.e. 25lb link fits the small crimps and 35lb link fits the medium ones. This creates the best possible attachment, eliminates uneven knots and ensures exact length rigs are easily accessible. Product details
Diameter: 0.64mm
Load capacity: 35 lbs
Length 20 meters
Fluorocarbon leader material
Clear illusion fluorocarbon
Link Mono is in Trans Khaki colors
Designed to work with Edges Crimps
Create perfect boom sections
Ideal for Hinge, Ronnie/Spinner and Combi Rigs
Fox Edges Link Trans Khaki Mono
The perfect monofilament leader material!
Edges Link Leaders are designed to work specifically with Edges Crimps to create perfect, clean and neat crimped rigs. Ideal for creating stiff connections on rigs such as The Hinge Rig, Ronnie/Spinner Rig and various Combi Rigs. The two different diameters/breaking strains are sized to fit the corresponding sizes of Edges crimps, i.e. 25lb link fits the small crimps and 35lb link fits the medium ones. This creates the best possible attachment, eliminates uneven knots and ensures exact length rigs are easily accessible. Product details
Diameter: 0.64mm
Load capacity: 35 lb
Length 20 meters
Color: Transkhaki
Monofilament leader material
Designed to work with Edges Crimps
Create perfect boom sections
Ideal for Hinge, Ronnie/Spinner and Combi Rigs
€7.99*
€7.77*
This website uses cookies to ensure the best experience possible. More information...